West Bend Engine 580 with Clutch and Mount

West Bend 580 to use on a project and have since changed directions.  The ID tag is missing and I do not know the difference.  It has a racing manifold and a racing flywheel (the fins have been removed).  I used my drill and fired it with some mixed gas I had and it’s loud. There are a few minor dings dents and such, the flywheel shroud needs to be repaired by one of the mounting bolts, one of the mounting tabs for the shroud is half gone.  None of the cylinder or head fins are missing.

I did notice that it runs backwards to all of the motors I have so the drive shaft would have to be on the RIGHT side of go kart.  It has a ton of compression with no knocks or rattles.

[phpbay keywords=”West Bend Engine 580″ num=”6″ siteid=”1″ sortorder=”BestMatch” templatename=”columns” columns=”3″]

[keywordstowebsites]West Bend Engine[/keywordstowebsites]